|
Wireless Equipment by Teletronics International
Teletronics' TT2400
High Power 250mW 802.11g
Bridge WPA/WPA2 & 64/128 bit WEP Data Security.
Ruggedized waterproof and all-weather enclosure.
The Bastion of Versatility.
TT2400, the bastion of versatility
with its inertability to not only bridge long
distances, but to act as the
ideal CPE solution. Boasting a
rich feature set with PoE Hub,
NAT functionality (coming
soon), RSSI 5 Ultra-bright LEDs, and a minimal footprint.
Reliable and Flexible.
Flexible and easy to deploy, the TT2400 delivers
outstanding
performance in a simple, cost-effective package.
TT2400 is
designed to provide high-performance connectivity
for wide-area
networks and to enable immediate cost-effective
deployment of
public and/or private WLAN networks for service
providers and enterprises.
TT2400
Features: |
Ultra High 500mW Output power in OFDM
modulation
(with optional Amplifier) |
Web & SNMP based Management |
Transparent Bridge supported with unlimited
MACs |
WPA, WPA2 & 64/128 bit WEP Data Security |
5 Ultra-bright LEDs indicating RSSI |
Ruggedized waterproof and all-weather
enclosure |
NAT & PoE Hub Coming Soon! |
All-Weather Enclosure.
The TT2400 802.11g High-Power bridge is designed
for outdoor
all-weather deployment and offers a robust weatherproof
case
that can protect itself against rain, wind, and
snow. For added
security and privacy, TT2400 has integrated WPA,
WPA2, 64/128
bit WEP data security, unlimited MACs, and Web
and SNMP Management.
TT2400
High Power Bridge Specifications |
Standard Compliance: |
IEEE
802.11b/g (54 Mbps) |
Modulation: |
OFDM w/ BPSK,
QPSK, 16 QAM, 64 QAM Modulation |
Frequency
Band:
|
2.4GHz
IEEE 802.11b/g ISM Band
USA (FCC): 2.412 GHz ~ 2.462 GHz (CH1
~ CH11)
Europe (ETSI): 2.412 GHz ~ 2.472 GHz
(CH1 ~ CH13)
Japan (TELEC): 11b:
2.412 Ghz ~ 2.484 GHz (CH1 ~ CH14)
11g: 2.412 GHz ~ 2.472 Ghz (CH1 ~ Ch13)
|
Data
Rate: |
54, 48, 36,
24, 18, 12, 11, 9, 6, 5.5, and 1 Mbps |
Output
Power (250mW): |
IEEE
802.11b: 22dBm (+/- 3dB) @ 1/2/5.5/11Mbps
IEEE 802.11g: 21dBm (+/- 3dB) @ 54
Mbps
22dBm (+/- 3dB) @ 48 Mbps
22dBm (+/- 3dB) @ 36 Mbps
22dBm (+/- 3dB) @ 6 Mbps |
Mounting: |
For both
wall and pole mount |
Enclosure: |
Silver Powder
Coated Cast Aluminum |
Receive Sensitivity: |
IEEE 802.11g
|
IEEE 802.11b |
54Mbps: ≤ -72dBm
48Mbps: ≤ -73dBm
36Mbps: ≤ -77dBm
24Mbps: ≤ -81dBm
18Mbps: ≤ -84dBm
12Mbps: ≤ -86dBm
9Mbps: ≤ -88dBm
6Mbps: ≤ -89dBm
11Mbps: ≤ -88dBm
5.5Mbps: ≤ -90dBm
2Mbps: ≤ -92dBm
1Mbps: ≤ -95dBm |
11Mbps: ≤
-88dBm
5.5Mbps: ≤ -90dBm
2Mbps: ≤ -92dBm
1Mbps: ≤ -95dBm |
RF
Channels: |
Total of
3 Non-Overlapping Channels |
Data
Security: |
WPA/WPA2,
64/128 bit WEP |
Fully
Transparent Bridge: |
Unlimited
MACs |
Management: |
Web and SNMP
based Management |
Ethernet
Connection: |
10/100 BaseT
Auto MDI/MDX |
Antenna
Connector: |
N-type Female |
Signal
Indicator: |
5 Ultra-bright
LEDs |
DC
Power Input: |
Includes
48VDC Adapter and PoE Injector
with surge protection IEEE 802.3af compliant |
Operating
Environment: |
-20 °C
to + 70 °C |
Teletronics' TT5800
High Power 802.11a
Bridge WPA/WPA2 & 64/128 bit WEP Data Security.
Ruggedized waterproof and all-weather enclosure.
The Bastion of Versatility.
TT5800, the bastion of versatility
with its inertability to not only bridge long
distances, but to act as the
ideal CPE solution. Boasting a
rich feature set with PoE Hub,
NAT functionality (coming
soon), RSSI 5 Ultra-bright LEDs, and a minimal footprint.
Reliable and Flexible.
Flexible and easy to deploy, the TT5800 delivers
outstanding
performance in a simple, cost-effective package.
TT5800 is
designed to provide high-performance connectivity
for wide-area
networks and to enable immediate cost-effective
deployment of
public and/or private WLAN networks for service
providers and enterprises.
TT5800
Features: |
Ultra High 500mW Output power in OFDM
modulation
(with optional M58 Amplifier) |
Web & SNMP based Management |
Transparent Bridge supported with unlimited
MACs |
WPA, WPA2 & 64/128 bit WEP Data Security |
5 Ultra-bright LEDs indicating RSSI |
Ruggedized waterproof and all-weather
enclosure |
NAT & PoE Hub Coming Soon! |
All-Weather Enclosure.
The TT5800 802.11a High-Power bridge is designed
for outdoor
all-weather deployment and offers a robust weatherproof
case
that can protect itself against rain, wind, and
snow. For added
security and privacy, TT5800 has integrated WPA,
WPA2, 64/128
bit WEP data security, unlimited MACs, and Web
and SNMP Management.
TT5800
High Power Bridge Specifications |
Standard Compliance: |
IEEE
802.11a |
Modulation: |
OFDM w/ BPSK, QPSK, 16
QAM, 64 QAM Modulation |
Frequency
Band:
|
5.725 - 5.850 GHz |
Data
Rate: |
54, 48, 36, 24, 18, 12,
11, 9, 6, 5.5, and 1 Mbps |
Output
Power (200mW): |
19 dBm (+/- 3dB) @ 6/9/12/18/24
Mbps
18 dBm @ 36 Mbps
17 dBm @ 48 Mbps
16 dBm @ 54 Mbps |
Mounting: |
For both wall and
pole mount |
Enclosure: |
Silver Powder Coated
Cast Aluminum |
Receive
Sensitivity: |
-87 dBm ≤ 6 Mbps
-70 dBm ≤ 54 Mbps
|
RF
Channels: |
Total of 12 Non-Overlapping
Channels
(4 Channels: 5.725 ~ 5.850 GHz) |
Data
Security: |
WPA/WPA2, 64/128 bit
WEP |
Fully
Transparent Bridge: |
Unlimited MACs |
Management: |
Web and SNMP based Management |
Ethernet
Connection: |
10/100 BaseT
Auto MDI/MDX |
Antenna
Connector: |
N-type Female |
Signal
Indicator: |
5 Ultra-bright LEDs |
DC
Power Input: |
Includes 48VDC Adapter
and PoE Injector
with surge protection IEEE 802.3af compliant |
Operating
Environment: |
-20 °C to + 70 °C
|
VERSA Series Wireless Router
The VERSA Series Router
is designed using robust components in an outdoor
enclosure to withstand adverse weather conditions.
The SmartCell Software embedded in this wireless router
greatly enhances its versatility, a competitive advantage
for
Wireless Internet Service Providers.
This versatile hardware delivers optimal performance
when it is used as a:
-Base Station Access Point
-Client Station/Customer Premises Equipment
-Customized unit for unique applications
Various PCMCIA wireless network cards supported
(not included)
Hardware
Specifications |
Processor: |
AMD SC520
133 MHz |
Memory: |
64 MB SDRAM |
Compact
Flash Card: |
64 MB Compact Flash Card |
Operating
System: |
Linux 2.4.13 - ac 7 Kernel |
Web
Management: |
Configuration, monitoring,
information |
PCMCIA
Slot: |
PCMCIA slot |
Ethernet
Interface: |
NSC DP83815 10/100 HD |
Mini
PCI Slot: |
Single Mini PCI Slot |
Serial
Port: |
9 Pins, Male RS-232 |
RF
Connector: |
N-Female |
Power
Consumption: |
Board: 75mA ; Board +
PCMCIA: 175mA. |
Safety
Voltage Range: |
18 VDC - 48 VDC (Board
v3.x)
12 VDC - 24 VDC (Board: v1.x and 2.x) |
AC
Adaptor: |
Input 120 VAC -- 60 Hz
-- 250 mA
Output 24 VDC -- 1000 mA
|
DC
Injector: |
Combine Power and Data
through an
RJ-45 Cable |
Cables: |
3' Straight RJ-45, 1'
Cross Over
RJ-45
Serial Null Modem (Propietary layout)
RF Adapter Cable type N Male or N Female
|
Dimensions
(PCB): |
6.4" x 5.2"
x 0.7" |
Weight: |
3.51lbs (Box, Board,
Adaptor Cable, AC Adaptor, DC Injector, RJ-45) (PCB
0.7lb) |
Dimensions
(enclosure-outside):
Dimensions (enclosure-inside): |
7.5" x 9" x
2.75"
7" x 7.5" x 2" |
Operating
Temperature: |
(14~140° F) -10
~ 60° C |
Humidity
(non condensing): |
5 ~ 80% |
LED
Indicators:
LED Position Image
(For Second Generation Only) |
Firmware
V. 2.21.3, 2.52.3,
3.02.4 or Higher
RED: Error
OFF: OK
ON Fixed: Bios Error
ON Blink: Firmware loading or Upgrading
Firmware V.2.2x ; 3.02x or Higher
GREEN 1: Power
ON: OK
OFF: No Power
Firmware V.2.2x ; 3.02x or Higher
GREEN 2: LAN
ON: Link
Blink: Data
OFF: No Link
Firmware V.2.6x ; 3.02.5
or Higher
Jumper LED: Wireless Link
(Optional LED Needed - Max. 6 mA)
ON: Link
Blink: No Link
OFF: Option not available |
"SmartCell"
Software Specifications:
|
Features |
Description |
RF
Features |
General IEEE 802.11 & IEEE 802.11b parameters.
Supported Firmware Version: 2.1
and Higher
AP Mode: Wireless Clients Link Quality.
Supported Firmware Version: 2.1
and Higher
Infrastructure Mode: Average Signal Level and Link Quality.
Supported Firmware Version:
3.02 and Higher
AdHoc Function in Route mode. (All cards supported)
Supported Firmware Version: 2.1
and Higher
Infrastructure Function in Route mode. (All cards supported)
Supported Firmware Version: 2.1
and Higher
Access Point Function in Route mode. (Teletronics cards
only)
Supported Firmware Version: 2.1
and Higher
Invisible ESSID Broadcast (Teletronics cards in AP Mode
only)
Supported Firmware Version: 3.04
and Higher |
Security
Features |
INTRA BSSD Broadcast Security. (Teletronics cards
in AP Mode only)
Supported Firmware Version: 3.05
and Higher
EZ HotSpot Web Redirect. (License key required).
Supported Firmware Version: 3.04
and Higher
WEP 64 & 128 bits. (11M Teletronics, Lucent Silver/Gold
& Cisco
LMC-342/352 & PCM-352 card supported)
Supported Firmware Version: 2.1
and Higher
MAC Address Filtering.
1. Wireless Adapter (Only for 2 & 11 Mbps Teletronics
cards as AP mode)
Supported Firmware Version: 2.52,
3.02, and Higher
2. Ethernet Adapter (Radio configured
as Infrastructure mode)
Supported Firmware Version: 3.05.2
and Higher
RADIUS Authentication Based on MAC. (11 Mbps Teletronics
cards in AP mode only)
Supported Firmware Version: 2.2
& 3.03 (Lic. Key Not Req.) / 3.04 and Higher ( Lic.
Key Req. for web redirect only) |
Advanced
Network Features |
General TCP/IP parameters for WLAN & Ethernet
Port
Supported Firmware Version: 2.1
and Higher
Static Routes and RIP Daemon v1.
Supported Firmware Version: 2.1
and Higher
Network Address Translation (NAT) and 1:1 IP Mapping
(Static NAT)
Supported Firmware Version: 2.1
and Higher
Class Based Queuing (CBQ)/Bandwidth Managment
Supported Firmware Version: 2.18
and Higher
Firewall & Port Forwarding
Supported Firmware Version: 2.18
and Higher |
Network
Services |
PPPoE Client. (Only available for Ethernet Port)
Supported Firmware Version: 3.04
and Higher
DHCP Server, DHCP Client & Relay Agent. (All cards
supported, except Raylink)
Supported Firmware Version: 2.2
and Higher
Radius Accounting. (11 Mbps Teletronics cards in AP
mode only)
Supported Firmware Version:
2.2 & 3.03 (Lic. Key Not Req.)
/ 3.04 and Higher ( Lic. Key Req. for web redirect only)
SNMP Agent
Remote SysLog Service. (All cards supported, except
Raylink)
Supported Firmware Version: 2.2
and Higher |
Supported
Wireless Network Cards |
Teletronics PRISM based (Ver. 2, 2.5, 3.0) PCMCIA
cards (DSSS)
Supported Firmware Version: 2.1
and Higher/ 2.52, 3.02 and Higher
Raylink PC Card Model 24020. (FHSS)(Discontinued)
Supported Firmware Version: 2.16c
only
Cisco Aironet LMC-342, 352 & PCM-352 (DSSS)
Supported Firmware Version: 2.1
and Higher
Lucent Orinoco Silver & Gold Card (DSSS)
Supported Firmware Version: 2.1
and Higher
|
Administration
Tools |
Configuration Import/Export Support
Supported Firmware Version: 2.63,
3.03 and Higher
Web Control Panel GUI Interface
Supported Firmware Version: 2.1
and Higher
Serial Port Rescue Console Interface
(Use Null Modem Cable included)
Supported Firmware Version: 2.1
and Higher
Firmware Upgrade Option
Supported Firmware Version: 2.1
and Higher
Ping Test Utility
Supported Firmware Version:
3.05.2 and Higher
|
Teletronics' SLAB2415 and 2419
With 15dBi/19dBi Patch Antenna.
This all-in-one TT2400 with 15dBi or 19dBi
patch antenna integrated solution
includes: 2.4GHz high-power 802.11b/g
radio and antenna integrated mounting
hardware, power-over-ethernet interface
and power supply.
SLAB2415 and SLAB2419
Features: |
Web & SNMP based Management |
Intra-BSS Traffic Blocking (Layer2 Isolation
for AP Mode) |
Adjustable Transmit (TX) Power |
VLAN Transparent Support |
Configurable ACK Timeout for Long Distance |
Antenna
Specifications for 15 and 19 dBi |
Frequency Range: |
2.4
- 2.5GHz |
Gain: |
15 dBi/19 dBi |
Maximum
Input Power: |
6 W |
Polarization: |
Vertical or Horizontal |
AZ/EL
Beamwidth: |
20° |
Front
to Back Ratio: |
26dB |
VSWR
50 Ohm: |
1.5:1 (max) |
Wind
Load: |
200 km/h |
Size: |
12" x 12"
x 7.5"/1.5" x 14.5" x 8 " |
Combined
Weight: |
11 lbs with radio/ 12 lbs with radio |
Connector: |
Outdoor RJ-45 All
Weather |
Mounting
Kit/Style: |
Included: Pole
Mount (Included) |
Operating
Temperature: |
-40°C to +
70°C |
Material: |
ABS |
Additional
Features: |
UV Stabilized |
Teletronics' SLAB5822 and 5826
With 22dBi/26dBi Patch Antenna.
This all-in-one TT5800 with 22dBi/26dBi
patch antenna integrated solution
includes: 5.8GHz high-power 802.11a
radio & antenna integrated mounting
hardware, power-over-ethernet
interface and power supply.
SLAB5822 and 5826
Features: |
Web & SNMP based Management |
Intra-BSS Traffic Blocking |
Adjustable Transmit (TX) Power |
VLAN Transparent Support |
Configurable ACK Timeout for Long Distance |
Antenna
Specifications |
Frequency Range: |
5725
- 5850 MHz |
Gain: |
22 dBi/26 dBi |
Maximum
Input Power: |
50 W |
Polarization: |
Vertical or Horizontal |
AZ/EL
Beamwidth: |
8°/8° / 6°:/6° |
Front
to Back Ratio: |
≥25 dB/ -30 dB (max) |
VSWR
50 Ohm: |
≤1.7 /1.7:1i |
Wind
Load: |
210 km/h / 220 km/h |
Size: |
12.2" x 12.2"
x 0.82" / 24": x 24" x 2" |
Combined
Weight: |
11 lbs |
Connector: |
Outdoor RJ-45 (All Weather) |
Mounting
Kit/Style: |
Included: Pole
Mount (Included) |
Operating
Temperature: |
-40°C to +
70°C |
Material: |
ABS (Aluminum Enclosure) |
Additional
Features: |
UV Resistant Material |
|
| |